• A three lobes blower.
• The air filter-silencer, connected on the blower’s inlet flange.
• The reactive silencer placed on the outlet side. It is metallic and ecological. lt is also the base-frame for the blower and motor.
• The drive is by an electrical motor through v-belts and pulleys (taper-lock system).
• The belt guard is made from steel sheet also with acoustic hood.
• The relief valve designed to evacuate air or gas when the pressure is over.
• The check valve protects the blower against a back pressure when the blower stops and the pipe is pressurized.
• The flexible rubber sleeve with clamps connects the group with the pipe.
• Filling and emptying oil system.
• The elastic feet, support the group.

• Frame system (which is delta system) is manufactured suitably for belt and pulley tensioning system treatment.
• Thickness of materials used in the product relieve blower’s static and dynamic burden and stabilizes it
• Motor platform is is manufactured suitably for using four different sized motor.
• Blower’s subframe is also acts as pressure silencer  and there are air breaking system that  avoids air polarisation in the system.
• (LMC 1445 70 Shore Las-par) Vibration insulator is used for muffling  the vibration of the frame.
• Special silicon design system is used  for discharge check valve.
• Suction silencer system is isolated by nonflammable  sponge system 6 cm FR.
• Air filter sord  which is produced with cartridge fiber system is durable to air drag.
• There is a place for  Airmat outlet system which is suitable for connection diameter .
• Safety valwes are manufactured as long-lasting and adjustable.
• Metal compensator is used for air outlet system according to its DN.

The sound proofing hood has turned into an essential element in most working environments in order to follow the current acoustic regulations. PG has performed acoustic tests improving this product noticeably. They are built from modular panels from galvanized metal sheet. The inner side of each acoustic panel is lined with self extenquishable polyester absorbing material covered with a waterproof film. The maintenance panel has a door to accede to maintenance points, and it is situated in the front part of the acoustic hood in order to install the groups side by side saving space. The rest of the panels are dis mountable. All acoustic hoods have floor to improve its handling. They also include a compact helicoidal electric fan, to dissipate the heat generated inside the acoustic hood. All the acoustic hoods have a filling and emptying oil system with an external oil sight glass.

• Water treatment plants
• Pneumatic transport
• Industrial vacuum airing equipment
• Fish farm
• Air supply for burners
• Textile industry
• Paper industry
• Fluidification beds
• Non-explosive gas transfer